Dr. Aleksandr Novytskyi Processing of rock basalt types in different types of fiber, a personal information site

NEW TECHNOLOGY PRODUCTION CBF

Innovative equipment and technology solutions manufacturing continuous basalt fiber

NATURAL STONE

He had long been in the service of man.

ENGINEERING DESIGN PRODUCTION CBF

Projects of manufactures basalt continuous fibers adapted to local conditions.

RESEARCH OF ROCKS

Determination of suitability for production of basalt continuous fibers

Some aspects of the technological process of CBF

Production of continuous basalt fiber based on the melting in the furnace crushed basalt, followed by stretching of the resulting melt filaments. The formation of filaments through holes in the bushing....

Technology of production of basalt continuous fiber

Technology of production continuous basalt fiber

Planet earth has rich deposits of a variety of natural stone materials, the outputs of which the surface is very beautiful and sometimes unique geological monuments of history...

Concrete reinforced with basalt fibers

At present, it has developed two directions of creation of composite materials: - Composites high modulus fibers (steel, asbestos, glass, basalt); - Composites low modulus fibers (nylon, polyethylene, polypropylene ....

Technology choice of basalt raw material

According to the research, taking into account the properties of the rocks, we have developed recommendations for the use of rock melts for the production of specific types of fibers....

Technology of production of basalt veil

A method for producing fibers based on a drawing by air (BB) has long been known. The method of pulling the fiber obtained relatively large length from 200 to 2000 mm, which is one of the main advantages of it in front of the other methods of producing staple fibers...

Peculiarities of chemical resistant CBF

Glass of basalt - organic solid amorphous body obtained by overcooling of the melt and having a gradual increase in the viscosity of the mechanical properties of crystalline solids. Glass is intermediate...

Wetting the surface of molten basalt bushing

In the production of mineral fibers at the nodes generating melt is used mainly platinum-rhodium alloys, heat resistant steel and ceramics less. In the process of developing...

Method for determining the suitability of rocks

For simplified determination of the suitability of raw materials for the production of different types of fibers from rocks, using only their chemical composition, the example of the ten common fields...

Basalt fiber roofing mastics

Bituminous mastic is a homogeneous mass of bitumen, dust or fibrous fillers (limestone, dolomite, quartz powder, talc or asbestos 7th grade, mineral wool), preservatives and additives...

Chemical and mineralogical composition of rocks

Magmatic rocks are formed by the solidification of magma, which are located on the lower part of the earth's crust or upper mantle...

Basalt and processing technologies in products

Because of to its unique properties, basalt fiber and products on its basis is becoming more widely used in all industries. Materials based on basalt fiber...

Materials and literature, which were used in the design of the site

1. German patent №809845 of 1944. 2. U.S. Patent №3357.014, publ. 03/30/71, group 65-1. 3. U.S. Patent №3.574.581, publ. 04/13/71, group 65-1...